finalize

Makefile

@@ -28,12 +28,18 @@ clean-all:
 clean-flutter-elinux:
 	./run_crops.sh bitbake -c clean flutter-elinux
 	
-clean-flutter-service:
+clean-flutter-pi-service:
-	./run_crops.sh bitbake -c clean flutter-service
+	./run_crops.sh bitbake -c clean flutter-pi-service
+	
+clean-flutter-auto-service:
+	./run_crops.sh bitbake -c clean flutter-auto-service
 
 clean-flutter-pi:
 	./run_crops.sh bitbake -c clean flutter-pi
-	
+
+clean-flutter-user:
+	./run_crops.sh bitbake -c clean flutter-user
+		
 clean-flutter-sdk:
 	./run_crops.sh bitbake flutter-sdk-native -cdo_cleanall
 

build/conf/local.conf

@@ -11,94 +11,54 @@
 # default values are provided as comments to show people example syntax. Enabling
 # the option is a question of removing the # character and making any change to the
 # variable as required.
-# TOOLCHAIN_HOST_TASK:append = " nativesdk-flutter-sdk"
-ENABLE_UART = "1"
 
+# manually set how many cores should be used to build
+# by default bitbake will use as many threads as available on the system
 #BB_NUMBER_THREADS = "16"
 #PARALLEL_MAKE = "-j 16"
 
-# INHERIT:remove = "uninative"
-# INHERIT += "mender-full"
-# flutter-service
-
-#
 # Machine Selection
-#
-# You need to select a specific machine to target the build with. There are a selection
-# of emulated machines available which can boot and run in the QEMU emulator:
-#
-#MACHINE ?= "qemuarm"
-#MACHINE ?= "qemuarm64"
-#MACHINE ?= "qemumips"
-#MACHINE ?= "qemumips64"
-#MACHINE ?= "qemuppc"
-#MACHINE ?= "qemux86"
-#MACHINE ?= "qemux86-64"
-#
-# There are also the following hardware board target machines included for 
-# demonstration purposes:
-#
-#MACHINE ?= "beaglebone-yocto"
-#MACHINE ?= "genericx86"
-#MACHINE ?= "genericx86-64"
-#MACHINE ?= "edgerouter"
-#
-# This sets the default machine to be qemux86-64 if no other machine is selected:
 MACHINE ??= "raspberrypi4-64"
 #MACHINE ??= "raspberrypi0-2w-64"
-# MACHINE ??= "raspberrypi3-64"
 
-# pi4
+##!! use flutter-pi-service or flutter-auto-service
-IMAGE_INSTALL:append = " flutter-pi flutter-auto flutter-elinux flutter-service flutter-libraries linux-firmware-rpidistro-bcm43430 linux-firmware-bcm43455 kernel-image kernel-devicetree liberation-fonts networkmanager dhcpcd iptables iw linux-firmware ca-certificates gstreamer1.0-rtsp-server gstreamer1.0 gstreamer1.0-plugins-base gstreamer1.0-plugins-good gstreamer1.0-plugins-bad gstreamer1.0-plugins-ugly gstreamer1.0-libav libinput libxkbcommon tzdata alsa-utils alsa-lib bcm2835-dev"
-CORE_IMAGE_EXTRA_INSTALL += "wayland weston cage"
 
-# pi 0 w2
+# pi4:
-#IMAGE_INSTALL:append = " flutter-pi flutter-elinux flutter-service flutter-libraries  linux-firmware-rpidistro-bcm43436s linux-firmware-bcm43455 kernel-image kernel-devicetree liberation-fonts networkmanager dhcpcd iptables iw linux-firmware ca-certificates gstreamer1.0-rtsp-server gstreamer1.0 gstreamer1.0-plugins-base gstreamer1.0-plugins-good gstreamer1.0-plugins-bad gstreamer1.0-plugins-ugly gstreamer1.0-libav libinput libxkbcommon tzdata"
+IMAGE_INSTALL:append = " flutter-auto flutter-auto-launch flutter-pi flutter-elinux flutter-auto-service my-rules flutter-libraries sudo linux-firmware-rpidistro-bcm43430 linux-firmware-bcm43455 kernel-image kernel-devicetree liberation-fonts networkmanager dhcpcd iptables iw linux-firmware ca-certificates gstreamer1.0-rtsp-server gstreamer1.0 gstreamer1.0-plugins-base gstreamer1.0-plugins-good gstreamer1.0-plugins-bad gstreamer1.0-plugins-ugly gstreamer1.0-libav libinput libxkbcommon tzdata alsa-utils alsa-lib bcm2835-dev flutter-user"
-# IMAGE-INSTALL:append = " network-manager dhcp-server wireless-tools dhcp-client"
 
-#alsa-dev alsa-lib alsa-utils bcm2835-dev tmux chrony tzdata
 
+# pi 0 w2:
+#IMAGE_INSTALL:append = " flutter-auto flutter-auto-launch flutter-pi flutter-elinux flutter-auto-service flutter-libraries  sudo linux-firmware-rpidistro-bcm43436s linux-firmware-bcm43455 kernel-image kernel-devicetree liberation-fonts networkmanager dhcpcd iptables iw linux-firmware ca-certificates gstreamer1.0-rtsp-server gstreamer1.0 gstreamer1.0-plugins-base gstreamer1.0-plugins-good gstreamer1.0-plugins-bad gstreamer1.0-plugins-ugly gstreamer1.0-libav libinput libxkbcommon tzdata alsa-utils alsa-lib bcm2835-dev"
+
+
+# needed only for flutter-auto:
+CORE_IMAGE_EXTRA_INSTALL += "wayland cage"
+
+
+# needed for gstreamer-plugins-ugly
 LICENSE_FLAGS_ACCEPTED = "commercial"
 
+# set the default timezone, will be synced by systemd
 DEFAULT_TIMEZONE = "Europe/Berlin"
 
-
-
-#MACHINE_EXTRA_RRECOMMENDS:append = " dhcp-server iptables iw wireless-tools dhcp-client linux-firmware linux-firmware-bcm43455 kernel-image kernel-devicetree liberation-fonts"
-
 INIT_MANAGER = "systemd"
 
-# MENDER_SERVER_URL = "https://mender.io"
+# wayland is only needed for flutter-auto
-#MENDER_TENANT_TOKEN = "<copy token here>"
-
-# RPI_USE_U_BOOT = "1"
-# MENDER_EFI_LOADER = "u-boot"
-# MENDER_PARTITION_ALIGNMENT_KB = "4096"
-# MENDER_BOOT_PART_SIZE_MB = "40"
-# VIRTUAL-RUNTIME_init_manager = "systemd"
-# DISTRO_FEATURES_BACKFILL_CONSIDERED = "sysvinit"
-# MENDER_SERVER_URL = "https://hosted.mender.io"
-# MENDER_TENANT_TOKEN = "eyJhbGciOiJSUzI1NiIsInR5cCI6IkpXVCJ9.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.dABkcij0pm7d4o4RqYsWWparQbZQ4J-uL0iaQuaoYzPnObdPemoB61JyzNcBnA0rYzBsaa5yu177rFnwNGzuxN-tdxID1BMpADo_EwrXRxuQlRx287XJQTZRa9Ilj-nUpDq-XWOePKccm2_6SmMP6cCvoyB3aHADIQ9bl99iM0txduj2uVA8KDh2vKa5zq_Cjci1DHomweY_k9wXlC9jDXQ_cLdfPrVK9gapemLVBMN0lw8RbdUWwYVUipCIOJVlN0jObpDIyEx5p4zRAqKEMJIEPrNvl32IdtWZS9H2QsfZQXLc3AflfpIhzvh3Wovs7y4iAO14o0Vb5PRPPj5e0nI7MQoyjQnv1VG_Lhd1gJoYB3bNcv1lMJC24B9lnEF3c68z2SAeOGgq17KZJb2NZRzw5qdoRXUWsbt5BhSbNqzCReL5xuCZxXkH2E4J4t2aSXhlEJsGOX9AEVetqnSe4oViTygAGmy6A_Q76EQLNjovA20YZjDC7nsJS428rDVw"
-# KERNEL_FEATURES:remove = "cfg/fs/vfat.scc"
-
 DISTRO_FEATURES:append = " systemd opengl wifi wayland pam"
 
+# meta-raspberry specific configuration for raspberry pi devices
 DISABLE_OVERSCAN = "1"
 DISABLE_SPLASH = "1"
 GPU_MEM = "64"
 DISABLE_RPI_BOOT_LOGO = "1"
 ENABLE_SPI_BUS = "1"
-# ENABLE_I2C = "1"
+ENABLE_UART = "1"
-
+# extra boot configuration for raspberry pi
-# KERNEL_MODULE_AUTOLOAD:rpi += "i2c-dev i2c-bcm2708"
-
 RPI_EXTRA_CONFIG = ' \n \
 dtparam=spi=on \n \
 dtparam=audio=on \n \
 '
 
-
-
 #
 # Where to place downloads
 #
@@ -338,5 +298,6 @@ PACKAGECONFIG:append:pn-qemu-system-native = " sdl"
 # this doesn't mean anything to you.
 CONF_VERSION = "2"
 
+# set output file format
 IMAGE_FSTYPES = "ext4 rpi-sdimg"
 SDIMG_ROOTFS_TYPE = "ext4"

poky/meta-stargazer/recipes-core/custom-scripts/files/flutter-auto-launch

@@ -0,0 +1,2 @@
+#!/usr/bin/env bash
+/usr/bin/flutter-auto --b=/flutter/flutter_elinux/3.19.2/release --c --f

poky/meta-stargazer/recipes-core/custom-scripts/flutter-auto-launch_1.00.bb

@@ -0,0 +1,9 @@
+LICENSE = "CLOSED"
+
+SRC_URI:append = " file://flutter-auto-launch "
+FILES:${PN} += "/usr/local/bin/flutter-auto-launch"
+
+do_install:append() {
+  install -d ${D}/usr/local/bin
+  install -m 0777 ${WORKDIR}/flutter-auto-launch ${D}/usr/local/bin
+}

poky/meta-stargazer/recipes-core/devices/flutter-auto-setup_1.00.bb

@@ -0,0 +1,9 @@
+LICENSE = "CLOSED"
+
+IMAGE_INSTALL:append = " flutter-auto flutter-elinux flutter-auto-launch flutter-libraries kernel-image kernel-devicetree liberation-fonts networkmanager dhcpcd iptables iw linux-firmware ca-certificates gstreamer1.0-rtsp-server gstreamer1.0 gstreamer1.0-plugins-base gstreamer1.0-plugins-good gstreamer1.0-plugins-bad gstreamer1.0-plugins-ugly gstreamer1.0-libav libinput libxkbcommon tzdata alsa-utils alsa-lib bcm2835-dev"
+
+# needed for gstreamer-plugins-ugly:
+LICENSE_FLAGS_ACCEPTED = "commercial"
+
+CORE_IMAGE_EXTRA_INSTALL += "wayland cage"
+DISTRO_FEATURES:append = " wayland"

poky/meta-stargazer/recipes-core/devices/flutter-pi-setup_1.00.bb

@@ -0,0 +1,6 @@
+LICENSE = "CLOSED"
+
+IMAGE_INSTALL:append = " flutter-pi flutter-elinux flutter-auto-launch flutter-libraries kernel-image kernel-devicetree liberation-fonts networkmanager dhcpcd iptables iw linux-firmware ca-certificates gstreamer1.0-rtsp-server gstreamer1.0 gstreamer1.0-plugins-base gstreamer1.0-plugins-good gstreamer1.0-plugins-bad gstreamer1.0-plugins-ugly gstreamer1.0-libav libinput libxkbcommon tzdata alsa-utils alsa-lib"
+
+# needed for gstreamer-plugins-ugly:
+LICENSE_FLAGS_ACCEPTED = "commercial"

poky/meta-stargazer/recipes-core/devices/pi0w2-setup_1.00.bb

@@ -0,0 +1,15 @@
+LICENSE = "CLOSED"
+
+IMAGE_INSTALL:append = " linux-firmware-rpidistro-bcm43436s linux-firmware-bcm43455 bcm2835-dev"
+
+# meta-raspberry specific configuration for raspberry pi devices
+DISABLE_OVERSCAN = "1"
+DISABLE_SPLASH = "1"
+GPU_MEM = "64"
+DISABLE_RPI_BOOT_LOGO = "1"
+ENABLE_SPI_BUS = "1"
+
+RPI_EXTRA_CONFIG = ' \n \
+dtparam=spi=on \n \
+dtparam=audio=on \n \
+'

poky/meta-stargazer/recipes-core/devices/pi4-setup_1.00.bb

@@ -0,0 +1,15 @@
+LICENSE = "CLOSED"
+
+IMAGE_INSTALL:append = " linux-firmware-rpidistro-bcm43430 linux-firmware-bcm43455 bcm2835-dev"
+
+# meta-raspberry specific configuration for raspberry pi devices
+DISABLE_OVERSCAN = "1"
+DISABLE_SPLASH = "1"
+GPU_MEM = "64"
+DISABLE_RPI_BOOT_LOGO = "1"
+ENABLE_SPI_BUS = "1"
+
+RPI_EXTRA_CONFIG = ' \n \
+dtparam=spi=on \n \
+dtparam=audio=on \n \
+'

poky/meta-stargazer/recipes-core/flutter-user/flutter-user_1.00.bb

@@ -0,0 +1,34 @@
+SUMMARY = "Example recipe for using inherit useradd"
+DESCRIPTION = "This recipe serves as an example for using features from useradd.bbclass"
+SECTION = "examples"
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://${COREBASE}/meta/COPYING.MIT;md5=3da9cfbcb788c80a0384361b4de20420"
+
+S = "${WORKDIR}"
+
+EXCLUDE_FROM_WORLD = "1"
+
+inherit useradd
+
+USERADD_PACKAGES = "${PN}"
+
+GROUPADD_PARAM:${PN} = "gpio; spi"
+
+USERADD_PARAM:${PN} = "-d /home/user1 -G input,video,gpio,spi -r -s /bin/bash user1;"
+
+do_install () {
+	install -d -m 755 ${D}${datadir}/user1
+
+	chown -R user1 ${D}${datadir}/user1
+	
+	install -d -m 711 ${D}/home/user1
+	chown -R user1 ${D}/home/user1
+	chgrp -R user1 ${D}/home/user1
+}
+
+FILES:${PN} = "${datadir}/user1/ /home/user1"
+
+# Prevents do_package failures with:
+# debugsources.list: No such file or directory:
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
+

poky/meta-stargazer/recipes-core/my-rules/files/90-interfaces.rules

@@ -0,0 +1,12 @@
+SUBSYSTEM=="input", GROUP="input", MODE="0660"
+SUBSYSTEM=="i2c-dev", GROUP="i2c", MODE="0660"
+SUBSYSTEM=="spidev", GROUP="spi", MODE="0660"
+SUBSYSTEM=="bcm2835-gpiomem", GROUP="gpio", MODE="0660"
+
+SUBSYSTEM=="gpio", GROUP="gpio", MODE="0660"
+SUBSYSTEM=="gpio*", PROGRAM="/bin/sh -c '\
+chown -R root:gpio /sys/class/gpio && chmod -R 770 /sys/class/gpio;\
+chown -R root:gpio /sys/devices/virtual/gpio && chmod -R 770
+/sys/devices/virtual/gpio;\
+chown -R root:gpio /sys$devpath && chmod -R 770 /sys$devpath\
+'"

poky/meta-stargazer/recipes-core/my-rules/my-rules_1.00.bb

@@ -0,0 +1,11 @@
+LICENSE = "CLOSED"
+
+SRC_URI:append = " file://90-interfaces.rules"
+FILES:${PN} += " /etc/udev/rules.d/90-interfaces.rules"
+
+do_install:append() {
+	install -d ${D}${sysconfdir}/udev/rules.d
+	install -m 0666 ${WORKDIR}/90-interfaces.rules ${D}/etc/udev/rules.d/90-interfaces.rules
+}
+
+PROVIDES = "my-rules"

poky/meta-stargazer/recipes-core/systemd/files/flutter-auto.service

@@ -0,0 +1,44 @@
+[Unit]
+Description=Flutter App Service
+After=network.target
+StartLimitIntervalSec=0
+
+Requires=systemd-user-sessions.service
+After=systemd-user-sessions.service
+
+After=plymouth-quit-wait.service
+
+Wants=dbus.socket
+After=dbus.socket
+
+Before=graphical.target
+
+ConditionPathExists=/dev/tty0
+
+[Service]
+Type=simple
+Restart=always
+RestartSec=1
+ExecStart=/usr/bin/cage /usr/local/bin/flutter-auto-launch
+
+User=user1
+Group=user1
+
+WorkingDirectory=/home/user1
+
+PAMName=login
+
+TTYPath=/dev/tty7
+TTYReset=yes
+TTYVHangup=yes
+TTYTDisallocate=yes
+
+StandardInput=tty-fail
+StandardOutput=journal
+StandardError=journal
+
+UtmpIdentifier=tty7
+UtmpMode=user
+
+[Install]
+WantedBy=multi-user.target

poky/meta-stargazer/recipes-core/systemd/files/flutter-pi.service

@@ -19,15 +19,14 @@ ConditionPathExists=/dev/tty0
 Type=simple
 Restart=always
 RestartSec=1
-#ExecStart=/usr/bin/cage /usr/bin/flutter-auto-launch
 ExecStart=/usr/bin/flutter-pi --release /flutter/flutter_elinux/3.19.2/release
 
-User=root
+User=user1
-Group=root
+Group=user1
 
-WorkingDirectory=/home/root
+WorkingDirectory=/home/user1
 
-PAMName=weston-autologin
+PAMName=login
 
 TTYPath=/dev/tty7
 TTYReset=yes

poky/meta-stargazer/recipes-core/systemd/flutter-auto-service_1.00.bb

@@ -0,0 +1,13 @@
+LICENSE = "CLOSED"
+inherit systemd
+
+SYSTEMD_AUTO_ENABLE = "enable"
+SYSTEMD_SERVICE:${PN} = "flutter-auto.service"
+
+SRC_URI:append = " file://flutter-auto.service "
+FILES:${PN} += "${systemd_unitdir}/system/flutter-auto.service"
+
+do_install:append() {
+  install -d ${D}/${systemd_unitdir}/system
+  install -m 0644 ${WORKDIR}/flutter-auto.service ${D}/${systemd_unitdir}/system
+}

poky/meta-stargazer/recipes-core/systemd/flutter-pi-service_1.00.bb

@@ -0,0 +1,13 @@
+LICENSE = "CLOSED"
+inherit systemd
+
+SYSTEMD_AUTO_ENABLE = "enable"
+SYSTEMD_SERVICE:${PN} = "flutter-pi.service"
+
+SRC_URI:append = " file://flutter-pi.service "
+FILES:${PN} += "${systemd_unitdir}/system/flutter-pi.service"
+
+do_install:append() {
+  install -d ${D}/${systemd_unitdir}/system
+  install -m 0644 ${WORKDIR}/flutter-pi.service ${D}/${systemd_unitdir}/system
+}

poky/meta-stargazer/recipes-core/systemd/flutter-service_1.00.bb

@@ -1,13 +0,0 @@
-LICENSE = "CLOSED"
-inherit systemd
-
-SYSTEMD_AUTO_ENABLE = "enable"
-SYSTEMD_SERVICE:${PN} = "flutter.service"
-
-SRC_URI:append = " file://flutter.service "
-FILES:${PN} += "${systemd_unitdir}/system/flutter.service"
-
-do_install:append() {
-  install -d ${D}/${systemd_unitdir}/system
-  install -m 0644 ${WORKDIR}/flutter.service ${D}/${systemd_unitdir}/system
-}

poky/meta-stargazer/recipes-example/example/example_0.1.bb

@@ -1,13 +0,0 @@
-SUMMARY = "bitbake-layers recipe"
-DESCRIPTION = "Recipe created by bitbake-layers"
-LICENSE = "MIT"
-
-python do_display_banner() {
-    bb.plain("***********************************************");
-    bb.plain("*                                             *");
-    bb.plain("*  Example recipe created by bitbake-layers   *");
-    bb.plain("*                                             *");
-    bb.plain("***********************************************");
-}
-
-addtask display_banner before do_build

poky/meta-stargazer/recipes-extended/sudo_%.bbappend

@@ -0,0 +1,11 @@
+AUTHORIZED_USER_NAME ?= "user1"
+
+do_install_append () {
+   # Add sudo accesses for user.
+	install -d -m 0710 "${D}/etc/sudoers.d"
+	echo "${AUTHORIZED_USER_NAME} ALL=(ALL) NOPASSWD: /sbin/shutdown" > "${D}/etc/sudoers.d/0001_${AUTHORIZED_USER_NAME}"
+	chmod 0644 "${D}/etc/sudoers.d/0001_${AUTHORIZED_USER_NAME}"
+}
+
+FILES_${PN} +=  "/etc/sudoers.d \
+			   /etc/sudoers.d/0001_${AUTHORIZED_USER_NAME}"